Rimblades® Rimsavers - Full Kit

RIMSAVERS RIM PROTECTORS BY RIMBLADES® ARE DESIGNED TO ADD A PROTECTIVE TRIM RING TO THE OUTER EDGE OF ALLOY WHEELS TO ACT AS A BUFFER WHEN THAT INEVITABLE KERB DAMAGE DOES OCCUR AND OFFER OUR HIGHEST LEVEL OF PROTECTION ON FLAT WHEELS.

PLEASE NOTE WE HAVE A NEW VERSION OF RIMSAVERS IN DEVELOPMENT SO ARE RUNNING DOWN STOCKS OF THE CURRENT VERSION. WE ONLY HAVE BLUE, PINK, GREEN, ORANGE & PURPLE LEFT IN STOCK. PRICE REDUCED TO £25 A SET TO CLEAR. ONCE THE OLD STOCK IS CLEARED, WE WILL GET THE NEW VERSION INTO PRODUCTION. 

IF YOU ARE LOOKING TO REPLACE A CURRENT SET OF RIMSAVERS, THE NEW RIMBLADES LIGHT IS NOW THE SAME PROFILE AND INCLUDES THE SAME JOINT COVERS AND IS A SUITABLE REPLACEMENT. 

CONSTRUCTION

Rimsavers are made from a near rigid plastic, that if it wasn’t made in such a thin design would appear as a hard plastic. It gets its flexibility from the thin lightweight design profile. Rimsavers are a bond on solution and have a semi-gloss smooth appearance that brake dust wipes straight off. Rimsavers have a stiff fitting guide lip on the top side and the 3M VHB (very high bond) tape is sealed from the weather, brake dust, road salt and wheel cleaners by a sealing lip.

BOND ON UNIVERSAL FITTING

Rimsavers are predominantly designed for the modern flat rimmed wheels common today, but will fit rims with a very slight curve if they have a sharp or squared off top edge. They are perfect on most Diamond Cut wheel designs.

Due to the lightweight design, although they use a 5MM wide tape, we have successfully fitted them on narrower flat lips with no issues. Rimsavers require cutting to size during each application, and are supplied in 4 x 2.1m metre lengths and will fit wheels up to and including 24” in diameter. Additionally included in the Rimsavers kit is a set of joint covers and adhesive, so even if you don’t get the cut just right, you can cover where the ends meet.

OPTIONS

Available in 12 colours.

PLEASE NOTE: The 2023 version of Rimsavers is a lighter shade of pink than shown with a rose gold joint cover kit.

KIT INCLUDES:

4 lengths of Rimsavers with factory applied 3M VHB, 4 x IPA cleaning wipes, 4 x adhesion promoters and a set of colour matched joint covers with adhesive (except pink & gold as above).

PACKAGING

Rimsavers are flexible and coiled into a strong 2 part box 16 x 16 x 7cm.