RIMSAVERS RIM PROTECTORS BY RIMBLADES® ARE DESIGNED TO ADD A PROTECTIVE TRIM RING TO THE OUTER EDGE OF ALLOY WHEELS TO ACT AS A BUFFER WHEN THAT INEVITABLE KERB DAMAGE DOES OCCUR AND OFFER OUR HIGHEST LEVEL OF PROTECTION ON FLAT WHEELS.
They are a similar profile as Rimblades® Light, but made from a harder grade of plastic that offers more strength. Once installed, they are tight fitting to the wheel and are like a hard shell around the rim surface.
Rimsavers are made from a near rigid plastic, that if it wasn’t made in such a thin design would appear as a hard plastic. It gets its flexibility from the thin lightweight design profile. Rimsavers are a bond on solution and have a semi-gloss smooth appearance that brake dust wipes straight off. Rimsavers have a stiff fitting guide lip on the top side and the 3M VHB (very high bond) tape is sealed from the weather, brake dust, road salt and wheel cleaners by a sealing lip.
BOND ON UNIVERSAL FITTING
Rimsavers are predominantly designed for the modern flat rimmed wheels common today, but will fit rims with a very slight curve if they have a sharp or squared off top edge. They are perfect on most Diamond Cut wheel designs.
Due to the lightweight design, although they use a 5MM wide tape, we have successfully fitted them on narrower flat lips with no issues. Rimsavers require cutting to size during each application, and are supplied in 4 x 2.1m metre lengths and will fit wheels up to and including 24” in diameter. Additionally included in the Rimsavers kit is a set of joint covers and adhesive, so even if you don’t get the cut just right, you can cover where the ends meet.
Available in 12 colours.
PLEASE NOTE: The new 2023 version of Rimsavers has a lighter shade of pink with a dark pink joint cover kit
4 lengths of Rimsavers with factory applied 3M VHB, 4 x IPA cleaning wipes, 4 x adhesion promoters and a set of colour matched joint covers with adhesive.
Rimsavers are flexible and coiled into a strong 2 part box 16 x 16 x 7cm.